Color each color

Composition: One-component coatings formulated from short oil alkyds, amino resins, pigments, fillers, thickeners, additives, solvents and the like.

Performance: coating wear resistance, tough and plump, bright color, oil, benzene-resistant solvents, water, boiling water, acid, alkali, salt corrosion and chemical atmosphere, and has good weather resistance.

Uses: Suitable for steel surface for anti-corrosion coating, but also for light industrial products, machine tools, electrical appliances and other surface protection and erosion coating.

Theoretical dosage: 140-160 g / square meter

Painting method: spray, brush.

Drying time: After spraying for 15-20 minutes, then bake at 120 degrees for 30 minutes.

Painting Road: Recommended Spray 4 Road, at the end of two, two sides

Dry film thickness: 20-30 micron / channel

Before the road supporting: ethylene phosphating primer, epoxy ester primer and so on

After the road supporting: amino drying varnish

Note: before the construction of the paint and stir well, and filter to remove mechanical impurities; if the paint is too thick, the spray will be diluted with a matching diluent to the appropriate viscosity; sprayed before the surface of the object will be coated to remove oil, Impurities, etc .; construction environment to be clean, ventilated, no dust.

Thinner: Amino diluent

Shelf life: 12 months