Composition: One-component coatings formulated from alkyds, amino resins, pigments, fillers, thickeners, additives, solvents, and the like.

Performance: film smooth, glossy soft, colorful, with good physical and mechanical properties and phosphating primer, epoxy ester primer supporting the use, can significantly improve the heat resistance, salt spray performance.

Uses: suitable for bicycles, electric fans, and other equipment and semi-light requirements of the metal surface.

Theoretical dosage: 200-220 g / m2

Painting method: spray, brush.

Drying time: After spraying for 15-20 minutes, then bake at 120 degrees for 30 minutes.

Before the road supporting: ethylene phosphating primer, epoxy ester primer and so on

After the road supporting: amino drying varnish

Note: before the construction of the paint and stir well, and filter to remove mechanical impurities; if the paint is too thick, the spray will be diluted with a matching diluent to the appropriate viscosity; sprayed before the surface of the object will be coated to remove oil, Impurities, etc .; construction environment to be clean, ventilated, no dust.

Thinner: Amino diluent

Shelf life: 12 months