H80-1 Epoxy Floor Coatings

 

Color: User-specified color card color

 

Composition: modified epoxy resin, coloring pigments, physical pigments, new additives, additives, solvents, curing agent and other components. Sub-A, B two-component packaging.

 

Features: in the dry ground can be directly painted, can achieve superior protection effect; solid content, cross-linking curing fast, thick coating can be completed once the floor coating works; moisture, acid, alkali, salt and other chemicals Reagents, excellent hot water resistance, with excellent wear resistance and load bearing properties.

 

Design Uses: suitable for the plant, warehouse, garage, laboratory, business buildings and other places of concrete stone tiles and other ground and the same material wall decoration and protective coating.

 

Theoretical dosage: 200 g / m2

 

Painting Method: Scratch-coating

 

Proportion: A component (paint): B component (curing agent) = 100: 15 (weight ratio)

 

Aging time: 23 ± 2 ℃: A and B components after mixing to be cured after 25 minutes to use

 

Drying time: 23 ± 2 ℃: dry surface ≤ 4 hours hard work ≤ 24 hours fully cured 7 days.

 

Surface treatment: 1, the substrate must be solid, clean, no oil, steel surface to remove the oil rust to Sa2.5 level, non-metallic substrate surface oil, application of solvent or detergent scrub clean.

 

2, if the surface is not flat or defect, etc., the application of the paint with the special powder (component C) into a paste body, the ground scraping a pressure flat.

 

Construction process: 1, with paint: the first component of a stir evenly, and then stir under the ingredients B slowly added to the A component, stirring even after standing for 20 minutes to build.

 

2, will be equipped with a good paint poured on the ground, with a scraper quickly scrape it, flat, static leveling 10 minutes later, spray a little thinner on the paint surface with a child pressure again, make it more smooth and smooth ; If the anti-skid effect, can be spread on top of a layer of yellow sand or gold sand, with a child gently pat flat, until the film hard work, the above thin coating a layer of the coating, painting that all Complete, maintenance can be used after a week.

 

Diluent: X-7 epoxy diluent dosage 10-20%

 

Shelf life: twelve months