H55-8 epoxy high solids drinking water tank paint (bottom / topcoat two components)

 

Color: Primer: iron red, finish: white or agreed color

 

Composition: Epoxy resin as the base material, pigments and fillers, anti-settling agent, dispersant, mixed solvent and other preparation, amine curing agent, sub-A, B two-component packaging, curing agent for the bottom of the general curing agent.

 

Features: The paint film has excellent water resistance, oil resistance and chemical resistance, the steel has excellent and anti-rust effect, and the storage of drinking water pollution, the construction of small odor, low toxicity, fast curing, Environmental pollution and other characteristics.

 

Design purposes: for storage tanks, drinking fountains, water pipes and other water industry, anti-corrosion coating; can also be used for beverage tanks, food industry, such as storage tanks, anti-corrosion coating.

 

Theoretical dosage: primer: 200 g / m2, topcoat: 260 g / m2

 

 

Painting method: spray, brush, roller coating

 

Proportion: A component (paint): B component (curing agent) = 100: 15 (weight ratio)

 

Aging time: 23 ± 2 ℃: A and B components after mixing to be cured after 30 minutes to use

 

Applicable period: 23 ± 2 ℃: less than 6 hours

 

Drying time: 23 ± 2 ℃: dry surface ≤ 4 hours hard work ≤ 24 hours fully cured 7 days

 

Painting interval: the shortest 24 hours, up to 7 days.

 

Painting Road: Recommended primer high pressure spray 2, dry film thickness of 80-150μm, finish 2, dry film thickness of 80-150μm

 

Surface treatment: coated with a primer in the workshop will need two rust, to Sweden derusting standard St3 level, the scale of steel surface sandblasting or shot blasting to Sweden rust standard Sa2.5 level, no oxide Of the steel surface, the manual mechanical derusting to Sweden derusting standard St3 level.

 

Water treatment: such as film completely cured (25 ℃ above 15 days), into the tap water placed soaking twice, the first 7 days, vent and then injected into place for 5 days, after the injection of water sampling test water quality, to ensure that the tap water be usable.

 

Diluent: Dedicated diluent dosage 5-15%

 

Shelf life: twelve months